CISCO GLC-GE-DR-LX

CreateDate:2018-03-09

CISCO GLC-GE-DR-LX


 

1. GLC-GE-DR-LXintroduction 

The GLC-GE-DR-LX is a cisco model of 100/1000BASE-LXSFP for Long-Reach Single-Mode Fibers.

The dual-rate 100M/1G 10Km SFP is interoperable withthe IEEE 100BASE-LX and 1000BASE-LX/LH standards.

The GLC-GE-DR-LX SFP also supports digital opticalmonitoring (DOM) functions according to the industry-standard SFF-8472multisource agreement (MSA). This feature gives the end user the ability tomonitor real-time parameters of the SFP, such as optical output power, opticalinput power, temperature, laser bias current, and transceiver supply voltage.

SFP Operation at 100M

The GLC-GE-DR-LX SFP can interoperate with other 100MSFPs/interfaces as long as those are based on 100BASE-LX10 standard. A 5dBattenuator is needed on the path of dual-rate SFP Tx and 100BASE-LX10 interfaceRx. No attenuator is needed on the other fiber strand.

SFP Operation at 1G

The GLC-GE-DR-LX SFP can interoperate with other 1GSFPs/interfaces as long as those are based on 1000BASE-LX/LH standard. Noattenuator is needed in any fiber strand.

 

2. Platform Support

This model can work in several cisco GE switches. Lookinto CSICO GE Tx matrix, and it can use in these devices:

 

Cisco ASR 900 Series Router

A900-IMA8T Software Release Required 3.18


 

A900-IMA8S1Z Software ReleaseRequired 3.17

 

ASR 9000 Series Router

 

A9K-MPA-20X1GE SoftwareRelease Required XR 5.2.2

 

A9K-RSP440-SE   Software Release Required XR 5.2.2

ASR 9000 Series Router (EOBC-supported optics)

 

ASR-9001、ASR-9001-S  Software Release Required XR 5.2.2

 

ASR9000v Series Router

 

ASR-9000V-AC、ASR-9000V-DC-A、ASR-9000V-DC-E、ASR-9000V-24-A

Software Release Required XR 5.2.2

 

A9KV-V2-AC、A9KV-V2-DC-A、A9KV-V2-DC-E  Software Release Required XR 5.2.2

 

These devices must be SoftwareRelease Required or up the version to support this model.

 

3. Test in cisco ASR 9001 switch

Cisco ASR 9001 GE Board can support the GLC-GE-DR-LX.We set the Gigabit Ethernet 0/0/0/0 to 1000M and set the Gigabit Ethernet0/0/0/1 to 100M to test the LX module with the GLC-GE-DR-LX code.

 

Gigabit Ethernet 0/0/0/0:

Link

  

Recognition and DOM

 

GigabitEthernet 0/0/0/1:

Link

 

 

Recognition and DOM

 

The LX in Gigabit Ethernet 0/0/0/0 can work in 1000Mspeed, and the LX in Gigabit Ethernet 0/0/0/1 can work in 100M speed. OurSFP-GE-LX is dual-rate 100M/1G 10Km SFP, and can work well in Cisco dual-ratedevice.

 


 

By Faten fang |Position: FAE

Email: fangzt@moduletek.com

      Phone: 15271810438

Date: 2018.02.03


 

 

 

 

Prev:The nominal bit rate of CFP in Cisco Nexus 7000 problem
Next:Cisco switch upgrade application guide Rev. 20171229.pdf