...
100% completed
Succeeded in loading“flash:/s6700ei-v200r005c00spc500.cc"from device 0. The current slot ID is1
...
Stack status: enable.
ECM STACK status: run

Initializing FSP task begin ...
...
The stack-port 1 turned toup at 2024-03-12 13:55:10
...
The stack-port 2 turned to up at 2024-03-12 14:03:58

FSP begin to connect.........................................................done

Slot 1 was elected as slave.
...
Slot 1 switched to the standby at 2024-03-12 14:06:18::720
...
Recover configuration...OK!
Press ENTER to get started.